News information

Introduction of bonding method of nail-free plastic load-bearing materials

Nail-free glue is widely used in building materials bonding. It can directly bond load-bearing materials. First, the load-bearing materials are bonded together, then separated, waiting for drying for about 5 minutes. Then, the materials to be bonded are firmly pressed, merged and pressed to make them in place. If necessary, it can be supported by pillars.
For ceilings, kick lines, doorframes and background walls, dry bonding is commonly used. The method is to extrude "Zhi" glue along the bonding surface. One side of the glue is extruded to the surface to be bonded, and the two sides are pressed tightly. The two bonding surfaces are pulled apart so that the strong glue of the liquid nail evaporates for 2-5 minutes. Then, the glue is pressed again and tapped along the joint.
After temporarily fixing the adhesive with auxiliary tools for 24 hours, the auxiliary fixing was cancelled. The best bonding effect was achieved within 24 hours, and the adhesive was completely cured within 2-3 days.

Shandong Youshuo New Building Materials Co., Ltd.

Tel:+08618606390331 Hotline:400-862-8008

Address:Linyi Industrial and Trade Development Zone, Shandong Province Tech